Home > Circuit Protection >

R58-10A Manual reset 10 amp
R58-10A Manual reset 10 amp
 
Product Price: $7.85


Product Code: MI-R58-10A
Qty:

Description
 
Electrical Characteristics (@ 25°C)
Calibration: Will continuously carry 100% of rating.
May trip between 101% and 144%, but must trip at 145%
of rating at +25°C
Maximum Operating Voltages: 50 VDC; 250 VAC, @ 50/60 Hz
Dielectric Strength: 1500VAC RMS
Resettable Overload Capacity: Ten times rated current
Interrupt Capacity:
2000 Amps at 50 VDC
1000 Amps at 250 VAC
Mechanical Characteristics
Termination: .250 (6.35) Quick Connect Terminals
NOTE: Soldering to terminals is not recommended.
Shock: Withstands to 10 g
Endurance Cycling: Over 1000 cycles at 200% of rated load.
Vibration: Withstands to 10 g at 10 to 55 Hz.
Weight: Less than 1.5 ozs. (42.5 g)
NOTE: 30A and 35A devices NOT UL or CSA

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Circuit Protection