This connector is used for all new style Converters & Equalizers
CONNECTION
The unit has three connections and a signal connection. The aluminum chassis is isolated and
may be grounded or ungrounded.
UNIT CONNECTIONS:
+24V/28V: This terminal is connected to the +24V side of the battery stack for equalizers.
In converter applications, the 24V OUTPUT is connected directly to 24V loads.
+12V:This terminal is connected to the +12V terminal of the battery stack.
GND: This is the terminal for grounding the unit. All internal operating currents are
returned to this terminal.
IGN: Pin 1 of the auxiliary connector is connected to the Ignition (+12V). This
connection enables and disables the unit. When voltage is applied to the ignition
terminal, the unit turns on.
OFFSET (for 12040E10 only): Pin 2 of the auxiliary connector is connected to the Offset
circuit (+12V). When voltage is applied to this terminal output is increased over
the normal setting.
