Single Conductor Copper Stranded, Polyvinyl Chloride Insulation, Flexible, Permanent Color & High Abrasion Resistance, Meets SAE Type GPT Specifications, Operating Temperatures of -20°F to 165°F, 3” Plastic Spool, 8 AWG BLACK 50 ft

PRO Series Inverters Performance inverters designed for RVs and boats Designed for RV and marine electrical systems that already have a battery charger or generator installed, Xantrex PRO Inverters deliver modified sine wave power for small appliances, TVs, and other onboard electronics from a battery bank.

12 volts, Number of Terminals: 4, Intermittent Duty

3203- Battery Isolator, 6-50VDC, Peak Output: 120 amps

Offering superior quality true sine wave output, the Prosine 1000 and 1800 stand-alone inverters are ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications, their 120-volt, 60 Hz AC power output is capable of handling both heavy duty and smaller, multiple AC loads.

(2) 5/16"-24 Threaded Studs for Battery & Motor, (2) 10-32 Threaded Terminals for Activation & Ground, 8mm x 15.1mm Mounting Slots-56mm Apart on Center, 85 Amp Carry Current Rating, Plasticized Housing

12 volts, 320 Amps, Leece Neville 4800/4900

ON-OFF (Normally ON) Switch, Plastic Coated Case, (2) 177.8mm Leads for Wire Connections

Number of Conductors: 6, Gauge of Largest Conductors: 12, Not Weather Sealed, Notes: (6) Split Pins in Socket, Spring Loaded Die Cast Debris Cap, Enclosed Rear Housing, (2) 6.7mm Mounting Holes-74.6mm Apart on Center, Socket Body Measures 31mm in Diameter, Wires Connect by Screw Terminals,